Introducing the Nucor "VR16 II"™ Vertical Rib Standing Seam Roof System

The Nucor "VR16 II"™ Roof System panel is a weathertight system that is an ideal solution for buildings with hips and valleys. The "VR16 II"™ roof panel offers an attractive architectural roof system available in both Galvalume® and Kynar 500® finishes as standard. "VR16 II" is the only vertical rib standing seam system with the Nucor F.O.C.U.S.

Click here to view the Nucor "VR16 II" Brochure

VR16 II Roof system by Nucor Building Systems

Nucor Builder: Winship Construction, Inc.

Nucor "VR16 II" Panel Details

Rib Height: 2"
Cover width: 16"
Factory sealant continuously applied along female rib
Minor striations to help reduce “oil canning”
Galvalume® finish and painted Kynar 500® finishes
Standard availability in 24 gauge material
Mechanically seamed for weathertight installation
Panel installed with concealed fastener clips that
allow for thermal movement
1/2:12 Minimum roof slope required


Click Here for "VR16 II" Construction Manual		Click Here for "VR16 II"™ Seaming Manual

Performance & Testing
ASTM E 1646 Water Leakage ASTM E1680 Air Infiltration Field tested under real-life conditions Laboratory tested under strict conditions
		Nucor Builder: BMB, Inc.

See the Nucor Building Systems R & D Lab		Click here for more about "VR16 II" Credentials